Work with us

Build something with us.

Bankasi Media makes independent tech videos and original designs from New York. For hardware brands, fellow creators and anyone who needs a part that does not exist yet.

Start a collaboration See what we have made to orderMedia kit
Line drawing: two people chatting across a desk, with a laptop playing a video between them and speech bubbles above.

Reach · as of October 2026

A small, dedicated and growing community.

Our audience is small and close: people who build and tune their own machines. Our videos reach far beyond it.

137,260

YouTube views across our 19 videos

Public video pages, October 2026

71,335

Views on our most-watched Short

Public video page, October 2026

342

Etsy sales since May 2025

Etsy shop BankasiCreations, October 2026

4.89 / 5

Rating from 85 Etsy reviews

Etsy shop BankasiCreations, October 2026

Daily visitors to our site nearly tripled in a month.

From 88 to 248 a day, comparing the 7-day averages of September 9–15 and October 2–8, 2026. Daily unique visitors as counted by Cloudflare.

906878586911813710611719618495177317107172229191213217166168166143349295265169287228Sep 9Oct 8

Sep 9–15: 88 a dayOct 2–8: 248 a day

Channel · October 2026

What people watch.

Short, honest experiments with real hardware, and longer videos that explain the gear. Most of our views come from Shorts.

  1. Short

    I Washed My Mouse With Soap & Water… Big Mistake

    71,335 viewsMar 2025

  2. Short

    I Mailed an AMD CPU RAW… This Was a TERRIBLE Idea

    15,671 viewsDec 2024

  3. Short

    I ‘Cleaned’ My PC With SOAP & WATER… (Huge Mistake)

    12,027 viewsMar 2025

  4. Video

    Logitech G Pro X2 Superstrike — G Hub Settings Explained

    3,129 viewsMar 2026

  5. Video

    I Dropped My GPU Temps for Just $0.46. (PCIe Fans 3D Printed Mod)

    2,311 viewsSep 2025

All videos on YouTube

Custom parts / Jan – Jul 2026

Made to order

Eight custom pieces for six customers, and three of them came back for a second. Each one started as a message describing a problem, often with measurements and photos of the build, and ended in their machine.

8

Custom pieces made

6

Customers

3

Came back for a second

100%

Delivered exactly as asked

01Christian

ZOTAC Gaming RTX 5090 AIO tube combs

Its page on [creations]ZOTAC 5090 AIO tube combs
ZOTAC Gaming RTX 5090 AIO tube combs: Comb

Rendered from the file we printed.

See it installed
  • Christian’s ZOTAC Gaming RTX 5090 build, before the combs
    Christian’s ZOTAC Gaming RTX 5090 build, before the combs
  • The first, smaller set on his tubes, before the 16 mm remake
    The first, smaller set on his tubes, before the 16 mm remake
  • The first set on his tubes, another angle
    The first set on his tubes, another angle

The brief

Christian already had our tube combs and asked for six to fit the thicker tubes of his ZOTAC Gaming RTX 5090 AIO, in translucent grey, with the ZOTAC Gaming claw mark on each clip. They are built from our own branded comb design, the family behind the Corsair, ASUS ROG and MSI combs.

How it came together

The first set followed the 12.4 mm he quoted. When his tubes measured 16 mm, we rescaled the combs at no charge and shipped three sizes, six clips each, so one would fit exactly. One did.

What we made

Fits
ZOTAC Gaming RTX 5090 AIO tubing, 16 mm
Set
6 clips in each of 3 sizes
Openings
13.1, 14.8 and 16.9 mm (measured from the file)
Finish
Translucent grey PETG, claw mark recessed into each clip

“The logo turned out great”

Christian, about the first set, in an Etsy message

Related in [creations]: AIO Radiator Comb & Clip

  1. Asked for six combs for his 5090 AIO, with the ZOTAC Gaming mark
  2. First set on the tubes: they measure 16 mm, not 12.4
  3. Rescaled at no charge; three sizes shipped
  4. Delivered; one size fit exactly

02Dorian

Plate for two 60 mm fans on a 140 mm mount

Its page on [creations]Two-fan 60 mm plate
Plate for two 60 mm fans on a 140 mm mount: Plate
View

Rendered from the file we printed. Fans, airflow and hot-air trails are illustrative.

See it installed
  • In Dorian’s case, below a 140 mm fan
    In Dorian’s case, below a 140 mm fan
  • The full front of the case
    The full front of the case
  • The plate with the fans’ rubber mounts
    The plate with the fans’ rubber mounts
  • Side view: plate and fans
    Side view: plate and fans
  • Edge view of the plate
    Edge view of the plate
  • Edge view, close up
    Edge view, close up

The brief

Dorian wanted to cool the hard drives at the bottom of his case: two Noctua NF-A6x25 PWM fans side by side, screwed onto a 140 mm fan mount, no taller than 8 cm, on a thin plate that takes the fans’ eight anti-vibration mounts. No grille, because his case already has a filter and a mesh front.

How it came together

He sent the exact hole positions and we drew the plate to them. He approved the design the same day; one section he did not need came off before printing.

What we made

Fits
A 140 mm fan position; two 60 × 25 mm fans
Size
139 × 80 mm, 2 mm plate (measured from the file)
Holes
50 mm fan spacing; 124.5 mm for the 140 mm mount
Colour
Black

“my hard drives are going to be in heaven.”

Dorian, on seeing the design, in an Etsy message

Read Dorian’s Etsy review

Related in [creations]: Dual 40 mm PCIe Fan Mount

  1. Asked for a two-fan plate for his hard drives
  2. Sent exact hole positions; design approved the same day
  3. Installed with the fans’ rubber mounts: “It works perfectly.”

03Brian

Jonsbo N4 92 mm fan adapter

Its page on [creations]Jonsbo N4 92 mm adapter
Jonsbo N4 92 mm fan adapter: Adapter
View

Rendered from the file we printed. Fans, airflow and hot-air trails are illustrative.

The brief

Brian came back after his first order for a second Jonsbo N4 part: a thin plate that sits in the case’s front panel and holds two 92 mm fans.

What we made

Fits
Jonsbo N4 front panel; two 92 × 14 mm fans
Size
274 × 119 mm, 1 mm plate (measured from the file)
Colour
Black

Designed in collaboration with Kudapex: Jonsbo N4 92mm Fan Adapter on MakerWorld

  1. Came back with a second request for his Jonsbo N4
  2. Printed and shipped

04Brian

Jonsbo N4 60 mm fan mount

Its page on [creations]Jonsbo N4 60 mm mount
Jonsbo N4 60 mm fan mount: Mount
View

Rendered from the file we printed. Fans, airflow and hot-air trails are illustrative.

The brief

A 60 mm fan mount for the Jonsbo N4, for better airflow through the drives. Brian sent the design he wanted; we printed it and shipped it.

What we made

Fits
Jonsbo N4; one 60 mm fan
Size
92 × 60 × 4 mm (measured from the file)
Colour
Black

Printed from Julian Schrader’s design (CC BY-SA 4.0): Jonsbo N4 60mm Fan Mount on Printables

“It’s great! Thank you!”

Brian, in an Etsy message
  1. Sent the design he wanted printed
  2. On its way
  3. “It’s great! Thank you!”

05Scott

Twin 40 mm fan mount for an HBA card

Its page on [creations]2 × 40 mm HBA card fan mount
Twin 40 mm fan mount for an HBA card: Mount
View

Rendered from the file we printed. Fans, airflow and hot-air trails are illustrative.

The brief

Scott needed air blowing straight up onto the heatsink of an HBA card, in the same orientation as our 120 mm PCIe mount but with Noctua NF-A4x20 fans. It is a hard part to find, so we drew one.

How it came together

The heatsink is long, so it became two fans, centred under it. The mount sits about 1.1 slots deep so the slot below stays free, and the bracket was adjusted after Scott measured his card.

What we made

Fits
A full-height PCIe slot; two 40 × 20 mm fans
Depth
About 1.1 slots
Size
121 × 122 × 25 mm (measured from the file)
Colour
Black

“That looks great, really appreciate it!”

Scott, on the final design, in an Etsy message

Related in [creations]: 120 mm PCIe Fan Mount

  1. Asked for a 40 mm take on our 120 mm PCIe mount
  2. Two fans proposed for the long heatsink
  3. Final design: about 1.1 slots, bracket adjusted to his card

06Rob Holland

Three 21 mm AIO tube combs

Its page on [creations]21 mm AIO tube combs
Three 21 mm AIO tube combs: Comb

Rendered from the file we printed.

The brief

Rob asked for three translucent tube combs with the ROG logo, sized for 21 mm tubing.

What we made

Fits
21 mm AIO tubing
Set
3 combs
Size
64 × 22.6 × 15 mm (measured from the file)
Finish
Translucent, ROG logo recessed into the clip

“Great find was able to listen to my request got the combs printed and shipped in no time at all”

Rob, in his Etsy review, February 2026

Related in [creations]: AIO Radiator Comb & Clip

  1. Asked for three translucent ROG combs for 21 mm tubing
  2. Custom listing made and ordered

07Dean Pesiri

120 mm airflow shroud for a turned CPU cooler

Its page on [creations]120 mm airflow shroud
120 mm airflow shroud for a turned CPU cooler: Shroud
View

Rendered from the file we printed. Fans, airflow and hot-air trails are illustrative.

The brief

The NAS in Dean’s server rack turns its CPU 90 degrees, so the air cooler blows upward, with only about 45 mm of room above it. The shroud sits on the cooler’s fan, turns the hot air toward the rear exhaust and keeps it away from the power supply. It mounts with the cooler’s own fan clips.

How it came together

The first version came together in a day. The second dropped the screw-access holes and extended the top of the duct. A slanted back was considered and left out, so nothing would get in the way of the cooler’s airflow.

What we made

Fits
A 120 mm fan on a CPU air cooler
Height
40.8 mm, inside his 45 mm (measured from the file)
Colour
Black

“The fan shround you made has also been perfect, no more changes needed.”

Dean Pesiri, in an Etsy message
  1. Asked for a duct for his NAS cooler, 45 mm of room
  2. First version in a day
  3. Second version: holes gone, top extended
  4. Confirmed: “no more changes needed”

08Dean Pesiri

Five 60 mm fans for a server rack’s top vent

Its page on [creations]5 × 60 mm rack fan mount
Five 60 mm fans for a server rack’s top vent: Mount
View

Rendered from the file we printed. Fans, airflow and hot-air trails are illustrative.

See it installed
  • Installed in the top of Dean’s rack
    Installed in the top of Dean’s rack
  • Fans fitted, before installation
    Fans fitted, before installation

The brief

Dean’s rack has a cutout on top, 32 cm wide and 5 cm tall, with screw holes 33 cm apart. He asked about four fans; we recommended five, because four left gaps between them.

How it came together

At 340 mm it was too long for the print bed, so it was printed in two pieces and joined.

What we made

Fits
A 32 × 5 cm rack vent, screw holes 33 cm apart; five 60 mm fans
Size
340 × 90 × 29.5 mm (measured from the file)
Colour
White

“you nailed it on the first time”

Dean Pesiri, in an Etsy message

Related in [creations]: Dual 40 mm PCIe Fan Mount

  1. Asked for a bracket for his rack’s top vent
  2. Five fans recommended instead of four
  3. Split in two for the print bed
  4. Installed: “you nailed it on the first time”

Previews are rendered from the files we printed for each customer and framed to the part, so they are not shown at a common scale; sizes are listed with each project. Fans, airflow and hot-air trails are illustrative, not measured flow. Customer photos are shared with permission.

What we make

Four ways people find us.

[creations]

Twenty-seven designs for PC builds and desks: nineteen in the catalog, manufactured from premium PETG-HF, and eight made to order. Every one can be turned and explored in 3D.

Explore all 27 designs

YouTube

@BankasiMedia

Shorts and longer videos on PC hardware, cooling mods and 3D printing, filmed in our workshop.

Watch on YouTube

Workbench

Guides and notes

Setup guides, test notes and the stories behind the designs, written from our own builds.

Read the Workbench

Discussion

Our forum

Where builders share setups, ask questions and help each other.

Join the discussion

Tested in our builds

We measure before we claim.

Our designs are tested in real machines, and we publish what we found, including the limits.

EliteDesk 800 Mini · five-fan mount vs. stock

−19.0°CNVMe drive
−13.0°CChipset
−9.0°CCPU peak vs. legacy

Results vary by setup; fans are not included.

Read the test notes

GPU temperature · PCIe fan mounts

−1.5°CPCIe mount, 2 × 40 mm fans
−3°CPCIe mount, 1 × 60 mm fan

GPU fan noise dropped too. Results vary by case, hardware and workload.

Watch the video

Customers

In their words.

Partnership inquiry

Tell us what you have in mind.

A product to review, a video idea, a part that needs designing. We read every message and reply by email.

Ways to work together

Sponsored or integrated videos

Your product in a Short or a longer video, built around a real experiment or build rather than a script read.

Product reviews

Hands-on reviews of PC components, peripherals, cases, mini PCs and 3D printing gear, tested in our own builds.

Custom designs

Parts made for a brand or a customer: the NVIDIA and Radeon GPU supports, the ASUS ROG combs and clips, and every piece in the made-to-order log above started that way.

Workbench features

A written feature on the Workbench, with setup notes and photos from our workshop.

Rates on request.We reply with options.

Figures are dated where they appear and are not updated automatically. Bankasi Media is not affiliated with the brands named on this page; names only describe what a part fits. No prices are listed: rates are on request.